Auto start Kit for EME60
Add electric start to your model! No more bad backs or scrabbling about on the ground! No more flipping a prop! Not just the bling value safer starting without risk of injury. Simply assign it to a switch and start your motor with the push of a butting/flip of a switch. Drive gear incorporates a one way bearing so power is not transferred back to the motor. The unit can be retro fitted to your existing engine!
Add electric start to your model! No more bad backs or scrabbling about on the ground! No more flipping a prop! Not just the bling value safer starting without risk of injury. Simply assign it to a switch and start your motor with the push of a butting/flip of a switch. Drive gear incorporates a one way bearing so power is not transferred back to the motor. The unit can be retro fitted to your existing engine!
Things you NEED to know: Some assembly is required and can be easily accomplished by most modelers provided you are comfortable working on your engines. You will need to remove your prop hub and shaft. You will also need to install a gear with a one way bearing. Basic mechanical mentality/skill is required as no instructions are included. You will also need to purchase the ‘autostart switch’ if you wish to operate the starter from your transmitter, alternatively you can install a socket on the exterior of your model to operate the starter from your field box power source.
Please note Grease your gears after assembly. DO NOT operate without a prop.
Specs:
Total Weight - 19oz. (560g)
480 Brushed Motor
Input up to 15V (2 or 3-cell lipo suggested)
We recommend the optional autostart switch for ease of use. Use on EME35, EME60 and can be retro fitted to the DLE35RA, DLE55, DLE55RA and many others